Four-Way Ball Valves Size:1/2″-20″ Pressure:150LB,300LB As per API6D
Four-Way Ball Valves Size:1/2″-20″ Pressure:150LB,300LB As per API6D
4 way ball valve
Four-way high-pressure block ball valves, designed for use as three-way selectors (T-bore, X-bore, 90° operation) for hydraulic applications for hydraulic applications and Multi-way valve with trunnion-style ball.
Size:1/2″-20″
Pressure:150LB,300LB
Material:WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 904l,Hastelloy C etc
Connection:Flanges
Operate:Hand lever, Gearbox, Pneumatic Actuator
Size:1/2″-20″
Pressure:150LB,300LB
Material:WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 904l,Hastelloy C etc
Connection:Flanges
Operate:Hand lever, Gearbox, Pneumatic Actuator
Quantity
Four way ball valve, designed for use as three-way selectors (T-bore, X-bore, 90° operation) for hydraulic applications for hydraulic applications and Multi-way valve with trunnion-style ball.4 way ball valve with threaded ends and L-L or double L ports are commonly used port configurations. This type of valve is used when a valve is required to perform two quarter-angle turns simultaneously. These valves always have two inputs and always have two outputs at any given time. In order to achieve this, the ball contained inside the valve is painstakingly machined.
- It completely seals with the use of pressure-activated seals.
- To restrict the range of motion between the valve’s open and closed positions, a limit mechanism is included in the handle.
- A lock hole is provided in the limit block for locking the switch position when the valve is used on a key device to prevent accidental activation. The switch’s on/off handle is properly labeled.
- lA flat key, spline, or square key connects the valve stem to the handle, allowing for easy disassembly and reassembly and high levels of adaptability. A mechanism to prevent blowouts is built into the valve stem.
- Braided, flexible graphite sealing rings or tetrafluoride sealing rings make up the packing of the valve, allowing the valve stem to achieve dependable sealing under certain lubrication conditions.
- Different variations of the sealing pair exist.
Certifications & Compliance
S J Valves are designed and manufactured to internationally recognized standards including, but not limited to the following :
Design: AF1 6D, API 608
Fire Testng AFI 607.AP1 6FA, BS 67S$ Pam II
Testing API 59B, 150 5208,85 6755 Part l as 6364
Marking MSS-SF-25, FED. AFI 6D
Cortifications: API607,SIL NACE,MROT7S,PED,ISO 15848
Partial List of Applications
- Oil & Gas Fipelines
- Refineries and Petochemical Plants
- Powar Goneration
- Gas and Coal Fired Turbines
- Gas Measurement Systems
- Offshore Piatforms
- Cryogenic Serice Appications
- Emegency Shut Down Wales
- Pulp & Paper
- Mining
- Boiler Sxeam and Drain Applications、
- Refineries and Petochemical Plants
- Powar Goneration
- Gas and Coal Fired Turbines
- Gas Measurement Systems
- Offshore Piatforms
- Cryogenic Serice Appications
- Emegency Shut Down Wales
- Pulp & Paper
- Mining
- Boiler Sxeam and Drain Applications、
Fire-Safe & Fugitive Emissions Certified
Packing arrangement is Fire-Safe foe critical applications and FugitiweEmissicns150 15848 carthad.
End Connections
Why SJ?
Precision Mlachined Forged BodyThe forged body tliminates
the possibility of leakage due to poor castings.Predision
finish machining keeps tight tolerances to ensure secureassambly
for high prassure, criical apphcat ons.
Ball/Seat LappingLapping saats to tho ball ensures tght tolorancas,
iimpraving shut.oftsealing capability while lowering torque requiremenes.
Recommend Products
Talk To Our Team
Have a question for our team? Get in touch with the details below.
BOTIM
+39 389 949 9067
PHONE
+39 389 949 9067
CONTACT INFORMATION
WORKING HOURS